Main
Catalog
Spiral-welded pipes (SSAW)
Seamless Pipes (Seamless)
Concrete Weighted Pipes (CWC)
Longitudinal seam pipes (LSAW)
Anti-corrosion pipes and insulation
Electric Welded Pipes (ERW)
Accessories and fittings
About the company
Advantages
Contacts
Drainage pipes
/ 4
Specification: SSAW steel pipe
Process: Spiral-seamed welded steel pipe made by submerged arc welding
Scope of application: Designed for transportation of liquid media at low pressure (water, gas, oil), and is also used in construction and pile construction.yy.
Standard: API 5L, API 5CT, ASTM A252, ASTM 53, EN10217, EN10219, BS 5950, ASTM A572, JIS, IS;
Certificate: EN10217, EN10219, API 5L PSL1 / PSL2, API 5CT
Outer diameter: 219.1mm –3048 mm
Wall thickness: 5.0mm-30mm
Length: Up to 70 m
Process: Spiral-seamed welded steel pipe made by submerged arc welding
Scope of application: Designed for transportation of liquid media at low pressure (water, gas, oil), and is also used in construction and pile construction.yy.
Standard: API 5L, API 5CT, ASTM A252, ASTM 53, EN10217, EN10219, BS 5950, ASTM A572, JIS, IS;
Certificate: EN10217, EN10219, API 5L PSL1 / PSL2, API 5CT
Outer diameter: 219.1mm –3048 mm
Wall thickness: 5.0mm-30mm
Length: Up to 70 m
Send a request
Steel grade:
API 5L: GR A, GR B, X42,X46, X56, X60,X65,X70
ASTM A252 GR 1, GR 2, GR 3
ASTM A53: GR A, GR B, GR C, GR D
BS 4360: Grade 43, Grade 50
EN: S275, S275JR, S355JRH, S355J2H;
Surface coating:
Fusion Bond Epoxy coating, Carbon resin epoxy, 3HA, Vanish coating, Bitumen coating, Black Oil coating upon customer request
Tests
Chemical composition analysis, mechanical characteristics (tensile strength, yield strength, elongation), technical characteristics (flattening test, bending test, tearing test, impact test), external size control, hydrostatic test, X-ray test.
Factory Quality Control Certificate:
according to EN 10204 type 3.1B
Wall thickness
API 5L: GR A, GR B, X42,X46, X56, X60,X65,X70
ASTM A252 GR 1, GR 2, GR 3
ASTM A53: GR A, GR B, GR C, GR D
BS 4360: Grade 43, Grade 50
EN: S275, S275JR, S355JRH, S355J2H;
Surface coating:
Fusion Bond Epoxy coating, Carbon resin epoxy, 3HA, Vanish coating, Bitumen coating, Black Oil coating upon customer request
Tests
Chemical composition analysis, mechanical characteristics (tensile strength, yield strength, elongation), technical characteristics (flattening test, bending test, tearing test, impact test), external size control, hydrostatic test, X-ray test.
Factory Quality Control Certificate:
according to EN 10204 type 3.1B
Wall thickness
ASTM A252 pile pipe
STAINLESS STEEL
ASTM A252 GR 1, GR 2, GR 3
Chemical composition of steel
Steel meets the following chemical composition requirements:
Phosphorus, maximum (%) : 0.050
MECHANICAL PROPERTIES
STAINLESS STEEL
ASTM A252 GR 1, GR 2, GR 3
Chemical composition of steel
Steel meets the following chemical composition requirements:
Phosphorus, maximum (%) : 0.050
MECHANICAL PROPERTIES
| STEEL GRADE | Yield strength, min. psi (MPa) | Tensile strength, min. psi (MPa) | Relative elongation at a length of 2 inches, at least (%) |
| BRAND 1 | 30,000 (205) | 50,000 (345) | 30% |
| MARK 2 | 35,000 (240) | 60,000 (415) | 25% |
| MARK 3 | 45,000 (310) | 66,000 (455) | 20% |
Tests
Chemical analysis, mechanical tests, visual inspection, tensile test, and dimensional check.
EN10219 Construction Pipe
STAINLESS STEEL
EN10219 S235, S275, S355, etc.
CHEMICAL COMPOSITION OF STEEL
Chemical analysis, mechanical tests, visual inspection, tensile test, and dimensional check.
EN10219 Construction Pipe
STAINLESS STEEL
EN10219 S235, S275, S355, etc.
CHEMICAL COMPOSITION OF STEEL
| STEEL GRADE | Mass fraction, max (%) | Текст ячейки | Текст ячейки | Текст ячейки | Текст ячейки |
| Текст ячейки | C | Si | Mn | P | S |
| GR B | 0.26 | 0.40 | 1.20 | 0.030 | 0.030 |
| X42 | 0.26 | 0.40 | 1.30 | 0.030 | 0.030 |
| X46 | 0.26 | 0.40 | 1.40 | 0.030 | 0.030 |
| X52 | 0.26 | 0.40 | 1.40 | 0.030 | 0.030 |
| X56 | 0.26 | 0.40 | 1.40 | 0.030 | 0.030 |
| X60 | 0.26 | 0.40 | 1.40 | 0.030 | 0.030 |
| X65 | 0.26 | 0.40 | 1.45 | 0.030 | 0.030 |
| X70 | 0.26 | 0.40 | 1.65 | 0.030 | 0.030 |
MECHANICAL PROPERTIES
| STEEL GRADE | Yield strength, min. psi (MPa) | Tensile strength, min. psi (MPa) | Extension of 2 inches, at least (%) | Minimum impact energy kV J | Текст ячейки | Текст ячейки |
| Текст ячейки | Текст ячейки | Текст ячейки | Текст ячейки | at the test temperature | Текст ячейки | Текст ячейки |
| Текст ячейки | Текст ячейки | Текст ячейки | Текст ячейки | -20 | 20 | |
| S235JRH | 235 | 360 | 24% | – | – | 27 |
| S275JOH | 275 | 430 | 20% | – | 27 | – |
| S275J2H | 355 | 510 | 20% | 27 | – | – |
| S355JOH | 355 | 510 | 20% | – | 27 | – |
| S355J2H | 355 | 510 | 20% | 27 | – | – |
| S355K2H | 355 | 510 | 20% | 40 | – | – |
Tests
Chemical analysis, mechanical tests, visual inspection, tensile test, size check.
Chemical analysis, mechanical tests, visual inspection, tensile test, size check.
Creation of websites, landing pages, and online stores
in Astana, Karaganda, Petropavlovsk, and Kazakhstan
www.raskrutov.kz
in Astana, Karaganda, Petropavlovsk, and Kazakhstan
www.raskrutov.kz
Наверх