Main
Catalog
Spiral-welded pipes (SSAW)
Seamless Pipes (Seamless)
Concrete Weighted Pipes (CWC)
Longitudinal seam pipes (LSAW)
Anti-corrosion pipes and insulation
Electric Welded Pipes (ERW)
Accessories and fittings
About the company
Advantages
Contacts
Structural pipes
/ 4
Specification: SSAW Steel Pipe
Process: spiral steel pipe, welded under flux (SSAW)
Application area: used for transporting low-pressure liquids such as water, gas, and oil; as well as in construction and pile driving;
Standard: API 5L, API 5CT, ASTM A252, ASTM 53, EN10217, EN10219, BS 5950, ASTM A572, JIS, IS;
Certificate: EN10217, EN10219, API 5L PSL1 / PSL2, API 5C
Outer diameter: 219.1mm –3048 m
Wall thickness: 5.0mm-30mm
Length: Up to 70 m
Steel Grade:
API 5L: GR A, GR B, X42, X46, X56, X60, X65, X70
ASTM A252 GR 1, GR 2, GR 3
ASTM A53: GR A, GR B, GR C, GR D
BS 4360: Grade 43, Grade 50
EN: S275, S275JR, S355JRH, S355J2H;
Process: spiral steel pipe, welded under flux (SSAW)
Application area: used for transporting low-pressure liquids such as water, gas, and oil; as well as in construction and pile driving;
Standard: API 5L, API 5CT, ASTM A252, ASTM 53, EN10217, EN10219, BS 5950, ASTM A572, JIS, IS;
Certificate: EN10217, EN10219, API 5L PSL1 / PSL2, API 5C
Outer diameter: 219.1mm –3048 m
Wall thickness: 5.0mm-30mm
Length: Up to 70 m
Steel Grade:
API 5L: GR A, GR B, X42, X46, X56, X60, X65, X70
ASTM A252 GR 1, GR 2, GR 3
ASTM A53: GR A, GR B, GR C, GR D
BS 4360: Grade 43, Grade 50
EN: S275, S275JR, S355JRH, S355J2H;
Send a request
Surface coating
Epoxy coating with thermodiffusion application (Fusion BondedEpoxy), coal tar-based epoxy coating, three-layer polyethylene coating (3PE), paint coating, bitumen coating, and Black Oil coating according to customer requirements.
Tests
Chemical composition analysis, mechanical characteristics (tensile strength, yield strength, elongation), technical characteristics (flattening test, bending test, tearing test, impact test), external dimensions control, hydrostatic test, and X-ray test.
Factory Quality Control Certificate:
according to EN 10204 type 3.1B
Wall thickness
Epoxy coating with thermodiffusion application (Fusion BondedEpoxy), coal tar-based epoxy coating, three-layer polyethylene coating (3PE), paint coating, bitumen coating, and Black Oil coating according to customer requirements.
Tests
Chemical composition analysis, mechanical characteristics (tensile strength, yield strength, elongation), technical characteristics (flattening test, bending test, tearing test, impact test), external dimensions control, hydrostatic test, and X-ray test.
Factory Quality Control Certificate:
according to EN 10204 type 3.1B
Wall thickness
STEEL TYPE
ASTM A252 pile pipe ASTM A252 GR 1, GR 2, GR 3
Chemical composition of steel The steel meets the following chemical composition requirements:
Phosphorus, maximum (%) : 0.050
MECHANICAL PROPERTIES
ASTM A252 pile pipe ASTM A252 GR 1, GR 2, GR 3
Chemical composition of steel The steel meets the following chemical composition requirements:
Phosphorus, maximum (%) : 0.050
MECHANICAL PROPERTIES
| STEEL GRADE | Yield strength, min. psi (MPa) | Tensile strength, min. psi (MPa) | Relative elongation at a length of 2 inches, at least (%) |
| MARK 1 | 30,000 (205) | 50,000 (345) | 30% |
| МАРК 2 | 35,000 (240) | 60,000 (415) | 25% |
| МАРК 3 | 45,000 (310) | 66,000 (455) | 20% |
Tests
Chemical analysis, mechanical tests, visual inspection, tensile test, and dimensional check.
EN10219 Construction Pipe
STAINLESS STEEL
EN10219 S235, S275, S355, etc.
CHEMICAL COMPOSITION OF STEEL
Chemical analysis, mechanical tests, visual inspection, tensile test, and dimensional check.
EN10219 Construction Pipe
STAINLESS STEEL
EN10219 S235, S275, S355, etc.
CHEMICAL COMPOSITION OF STEEL
| STEEL GRADE | Mass fraction, max (%) | Текст ячейки | Текст ячейки | Текст ячейки | Текст ячейки |
| Текст ячейки | C | Si | Mn | P | S |
| GR B | 0.26 | 0.40 | 1.20 | 0.030 | 0.030 |
| X42 | 0.26 | 0.40 | 1.30 | 0.030 | 0.030 |
| X46 | 0.26 | 0.40 | 1.40 | 0.030 | 0.030 |
| X52 | 0.26 | 0.40 | 1.40 | 0.030 | 0.030 |
| X56 | 0.26 | 0.40 | 1.40 | 0.030 | 0.030 |
| X60 | 0.26 | 0.40 | 1.40 | 0.030 | 0.030 |
| X65 | 0.26 | 0.40 | 1.45 | 0.030 | 0.030 |
| X70 | 0.26 | 0.40 | 1.65 | 0.030 | 0.030 |
MECHANICAL PROPERTIES
| STEEL GRADE | Yield strength, min. psi (MPa) | Tensile strength, min. psi (MPa) | Extension of 2 inches, at least (%) | Minimum impact energy kV J | Текст ячейки | Текст ячейки |
| Текст ячейки | Текст ячейки | Текст ячейки | Текст ячейки | at the test temperature | Текст ячейки | Текст ячейки |
| Текст ячейки | Текст ячейки | Текст ячейки | Текст ячейки | -20 | 20 | |
| S235JRH | 235 | 360 | 24% | – | – | 27 |
| S275JOH | 275 | 430 | 20% | – | 27 | – |
| S275J2H | 355 | 510 | 20% | 27 | – | – |
| S355JOH | 355 | 510 | 20% | – | 27 | – |
| S355J2H | 355 | 510 | 20% | 27 | – | – |
| S355K2H | 355 | 510 | 20% | 40 | – | – |
Tests
Chemical analysis, mechanical tests, visual inspection, tensile test, and dimensional check.
Chemical analysis, mechanical tests, visual inspection, tensile test, and dimensional check.
Creation of websites, landing pages, and online stores
in Astana, Karaganda, Petropavlovsk, and Kazakhstan
www.raskrutov.kz
in Astana, Karaganda, Petropavlovsk, and Kazakhstan
www.raskrutov.kz
Наверх